Instruction manual

4. WIRING
IMR01Y06-E6
15
3. Turn on the termination resistor transfer switch in the terminal base.
The COM-JC is shipped from the factory with the selector switch set to “ON: Termination
resistor connected.”
Termination resistor
transfer switch
Termination
resistor ON
(120 Ω 1/2 W)
Termination
resistor OFF
Factory set value: ON
OF F
ON
A terminal base of the state which removed module mainframe
4. Push the mainframe thus separated in the terminal base until firmly locked.
Terminal base
Mainframe
Push the module
mainframe until
firmly locked
Mounting the module mainframe