Owners manual

ASSEMBLY INSTRUCTIONS
A. HOSE TO TANK ASSEMBLY
1. Insert the pink siphon tube approximately ½” into the pink hose insert otherwise sprayer will spray only air.
2. Lubricate the black o-ring on the pink hose insert and then push (2a) into the threaded tank nipple until fully
seated.
3. Screw hose nut onto threaded tank nipple. Firmly hand tighten.
B. FLOW CONTROL TO HOSE
1. Remove the flow control hose nut from the flow control and slide over the hose.
2. Push the hose over the pointed end of the flow control until it touches the threads.
3. Screw the flow control hose nut onto the flow control. Firmly hand tighten.
IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR ARE MISSING PARTS DO NOT RETURN SPRAYER TO THE STORE!
PLEASE CALL OUR CONSUMER HOTLINE AT 1-800-253-4642
Year Round: Mon. – Fri., 8:00 a.m. to 7:00 p.m., ETMarch 1 – August 31: Sat. and Sun., 10:00 a.m. to 4:00 p.m., ET
Or write us at: Root-Lowell Manufacturing Co., 1000 Foreman Rd.
P.O. Box 289, Lowell, MI 49331
Visit us on the internet:
www.rlflomaster.com
e-mail: [e-mail]
Owner’s Manual
Bleach Sprayer
WARNING!!! THIS PRODUCT IS DESIGNED TO SPRAY CHEMICALS THAT MAY BE HARMFUL AND COULD
CAUSE SERIOUS PERSONAL INJURY IF INHALED OR BROUGHT INTO CONTACT WITH THE USER.
FAILURE TO READ AND FOLLOW OWNERS’ MANUAL INSTRUCTIONS BEFORE USE AND/OR MISUSE
OF THIS PRODUCT COULD RESULT IN EXPLOSIVE FAILURE WITH MAJOR INJURIES.
971-283
3/08
• ALWAYS water test sprayer before each use.
• ALWAYS wear long sleeve shirts, long pants, goggles, gloves and durable shoes.
• ALWAYS READ AND FOLLOW label instructions for the chemicals to be applied.
• AFTER USE release pressure and clean the sprayer.
• ALWAYS RELEASE pressure in sprayer before servicing.
• DO NOT alter the sprayer or any components.
• DO NOT spray flammable, caustic (i.e. acids), corrosive, heated or self-heating solutions with this sprayer.
• DO NOT mix bleach with other chemicals.
• DO NOT store liquids in the sprayer.
• NEVER fill tank above the “MAX FILL LINE” on the tank.
1 2 2a 3
1 2 3