Operation Manual

ManualsBrandsRL ManualsElectronicsWIFI IPC

Table Of Contents

WIFI KIT
- 1．WIFI IPC Installation
- 2．WIFI IPC Parameter

１

WIFI KIT

WIFI IPC Operation Manual

1．WIFI IPC Installation

Please make sure the device is intact and all the parts are ready before installation.

Note: The mounting wall should withstand at least 4 times the total weight of the wifi camera and

accessories.

1.1 WIFI IPC appearance and interface

Interface for the wifi camera, refer to following figure 1-1

Figure 1-1 wifi camera appearance indication and interface diagram

No.

Name

Function

3-axis bracket

Adjust direction of the camera

Antenna

Transmitting & receiving wifi signal

Rear cover

Rear cover for housing

Front cover

Front cover for housing

Double ring glass

Prevent light leaking from lens

Power port

DC12V power supply

matching button

NVR matching

antenna port

Antenna port base

Summary of content (4 pages)

PAGE 1
WIFI KIT WIFI IPC Operation Manual 1．WIFI IPC Installation Please make sure the device is intact and all the parts are ready before installation. Note: The mounting wall should withstand at least 4 times the total weight of the wifi camera and accessories. 1.1 WIFI IPC appearance and interface Interface for the wifi camera, refer to following figure 1-1 Figure 1-1 wifi camera appearance indication and interface diagram No.
PAGE 2
1.2 Installation procedure 1. Drilling mounting hole: Mark the hole position in the mounting wall, drilling 3 holes by a Φ5mm drill, the depth of the hole is not less than 30mm, and then insert the wall plugs to the hole. 2. Fixing the wifi camera: using the PA4 screw to fix the camera base to the mounting wall. As show in figure 2-2 . Figure 2-2 fixing the wifi camera 3. Adjust the 3-axis bracket: loosen the locking screw for the bracket and then adjust the bracket.
PAGE 3
2．WIFI IPC Parameter Item Parameter Image Sensor 1/2.9” Min. Illumination 0.05Lux/F1.2(Color)；0.01Lux/F1.2(night) Video Compression H.264 H.264 Type Baseline Profile/Main Profile Lens Mount M12 Lens 3.6mm Day & Night IR Cut Filter IR LED 12 PCS SMT LED Max. Resolution 1920 × 1280 @15fps Shade setting OK Image setting Brightness，Contrast，Saturation，Tone Alarm OK Protocols Proprietary protocol Wireless Standards IEEE 802.11b/g/n, 802.3,802.3n Frequency Range 2.4 GHz to 2.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.