The original press fittings specifically engineered to join tube in high-pressure HVAC and refrigeration systems. Proudly Made in America The familiar RLS stamp ensures a reliable connection! rapidlockingsystem.
Table of Contents Look For The Mark! Introduction................................................................................ 3-5 Couplings and Slip Couplings....................................................... 6 90° Elbows and 90° Street Elbows............................................... 7 45° Elbows and Tees..................................................................... 8 Reducers and Reducing Bushings................................................ 9 SAE/Euro Flares and Caps............
Introduction RLS Press Fittings were specifically designed and engineered to join copper tube in high-pressure HVAC and refrigeration systems. Our patented RLS Press Fittings are fully registered and listed to UL207 for pressures up to 700 PSI. These first-of-their-kind fittings connect quickly and easily using an RLS-approved press tool and jaws, replacing the time-consuming practice of manually brazing joints. The pressing procedure is similar to the one used with water press fittings.
Introduction As easy as 1-2-3! RLS Press Fittings offer a simple, . effective and economical method . to create leak-free copper tube . connections. The RLS pressing . process is very straightforward, . and can be completed with minimal . training. Copper tube ends are first prepped the same way as with brazing. Then, in just 10 seconds, the press. tool creates a permanent and reliable . mechanical joint without the dangers of heat or flammable gas. 1. Insert the tube in the fitting The RLS Advantage 2.
All RLS products are approved for use with the following refrigerants: R-32 R-125 R-134a R-143a R-152a R-227ea R-290 R-404A R-407A R-422A R-407B R-407C R-407F R-407G R-407H R-410A R-417A R-421A R-422B R-422C R-422D R-424A R-427A R-434A R-437A R-438A R-442A R-444A R-444B R-445A R-446A R-447A R-448A R-449A R-449B R-449C R-450A R-451A R-451B R-452A R-452B R-452C R-453A R-454A R-454B R-513B R-515A R-454C R-455A R-456A R-457A R-458A R-507A R-513A R-515B R-600
Couplings DIMENSIONS Couplings D B A Size (Inch) Slip Couplings Part Number C Dimensions (Inches) A B C Box Quantity D Carton Quantity Carton Weight 2.3 lbs. 1/4 3011040400111 0.26 0.34 0.45 0.95 10 100 5/16 3011050500111 0.32 0.40 0.52 0.93 10 100 2.9 lbs. 3/8 3011060600111 0.39 0.47 0.59 0.98 10 100 3.5 lbs. 1/2 3011080800111 0.51 0.59 0.73 1.25 10 100 6.1 lbs. 5/8 3011101000111 0.64 0.74 0.89 1.24 10 100 9.5 lbs. 3/4 3011121200111 0.76 0.
ELBOWS A DIMENSIONS 90° Elbows D E B C Size (Inch) Dimensions (Inches) Part Number A B C D E Box Carton Quantity Quantity Carton Weight 1/4 3031040400111 0.26 0.34 0.45 2.01 0.68 10 100 4.4 lbs. 5/16 3031050500111 0.32 0.40 0.52 2.13 0.81 10 100 5.8 lbs. 3/8 3031060600111 0.39 0.47 0.59 2.27 0.93 10 100 7.4 lbs. 1/2 3031080800111 0.51 0.59 0.73 2.88 1.18 10 100 11.6 lbs. 5/8 3031101000111 0.64 0.74 0.89 3.21 1.47 10 100 20.0 lbs.
ELBOWS/Tees DIMENSIONS 45° Elbows D A E B Size (Inch) Part Number 3/8 1/2 C Dimensions (Inches) Box Carton Carton Quantity Quantity Weight A B C) D E 3081060600111 0.39 0.56 0.59 2.94 1.21 10 100 3081080800111 0.51 0.71 0.73 3.72 1.54 10 100 9.6 lbs. 5/8 3081101000111 0.64 0.86 0.88 3.97 1.64 10 100 15.9 lbs. 3/4 3081121200111 0.76 1.02 1.07 4.12 1.70 10 40 9.4 lbs. 7/8 3081141400111 0.89 1.13 1.19 4.49 1.86 10 40 12.7 lbs. 5.8 lbs.
reducers/reducing bushings Reducers DIMENSIONS G C B Size (Inch) Part Number 3/8 to 1/4 3051060400111 1/2 to 1/4 3051080400111 1/2 to 3/8 A D Dimensions (Inches) A B C 0.39 0.47 0.59 0.51 0.59 0.73 3051080600111 0.51 0.59 0.73 E E F G Box Quantity Carton Quantity Carton Weight 0.26 0.34 0.45 2.24 10 100 3.8 lbs. 0.26 0.34 0.45 2.71 10 100 5.0 lbs. 0.39 0.47 0.58 2.58 10 100 5.5 lbs. D 5/8 to 1/4 3051100400111 0.64 0.74 0.89 0.26 0.34 0.45 2.
FLARES/CAPS DIMENSIONS SAE/Euro Flares C A B D Size (Inch) Part Number Dimensions (Inches) A B C D Box Quantity Carton Quantity Carton Weight 2.5 lbs. 1/4 3291040000111 0.26 0.45 1.38 0.56 10 100 3/8 3291060000111 0.39 0.59 1.38 0.58 10 100 3.7 lbs. 1/2 3291080000111 0.51 0.72 1.13 0.75 10 100 5.9 lbs. 5/8 3291100000111 0.64 0.87 1.48 0.75 10 40 3.6 lbs. 3/4 3291120000111 0.76 1.05 1.48 0.80 10 40 5.2 lbs.
ancillary products ODM products are compatible with RLS fittings. ODM Y-Joints DIMENSIONS BB AA AA CC AA ODM P-Traps Size (Inch) Part Number 3/8 Dimensions (Inches) A B C Box Quantity Carton Quantity 3771060606111 0.38 7.56 2.36 2 44 1/2 3771080808111 0.50 8.94 2.48 2 44 5/8 3771101010111 0.63 9.45 2.60 2 42 3/4 3771121212111 0.75 10.16 2.72 2 24 7/8 3771141414111 0.88 12.09 2.87 2 24 1-1/8 3771181818111 1.13 13.11 3.54 1 10 1-3/8 3771222222111 1.
ancillary products ODM products are compatible with RLS fittings. DIMENSIONS ODM Sight Glasses A A B ODM Ball Valves Size (Inch) Part Number Dimensions (Inches) A B Box Quantity Carton Quantity 1/4 3781040400111 0.25 4.02 1 100 3/8 3781060600111 0.37 4.69 1 100 1/2 3781080800111 0.50 6.10 1 100 5/8 3781101000111 0.63 6.14 1 50 3/4 3781121200111 0.75 6.34 1 50 7/8 3781141400111 0.88 6.57 1 50 1-1/8 3781181800111 1.13 7.
TOOLS AND JAWS Tools, Jaws and Accessories Klauke® 19 kN Crimping Tool Benefits: • Lightweight design increases productivity • Short pressing cycle, 10 seconds or less • Compact design and 350° jaw rotation allows technician to install in tight spaces • Automatic piston return • Safety feature that lets the crimp cycle be interrupted, allowing for manual release of the piston, if needed • High-quality, powerful Makita Li-Ion technology provides 100-150 crimps per charge, with charging time of just
Tools, Jaws and Accessories Klauke®®® Tool and Jaw Kits Tool Kit (No Jaws) Includes the Klauke 19kN Crimping Tool, 2 Lithium-ion Batteries, a Battery Charger, and the Accessory Kit (contents listed below) in a hard plastic carrying case.. Part Number: 399011190001 Tool Kit with 3-Jaw Set Includes the Klauke 19kN Crimping Tool, 2 Lithium-ion Batteries, a Battery Charger, 3 Jaws (3/8", 1/2", 7/8"), and the Accessory Kit (contents listed below) in a hard plastic carrying case.
Tools, Jaws and Accessories RIDGID®® Jaws RIDGID introduced plumbers to pressing nearly 20 years ago, and they take their industry leadership position seriously. . The same is true of RLS. That’s why we’re proud to also partner with RIDGID to offer jaws for use with various RIDGID press tools that are compatible with RLS Press Fittings.
TECHNICAL DATA Applications Agency Approvals and Certifications • High Pressure HVAC/R • Ethylene Glycol • Non-Potable Water Product Parameters • Continuous Operating Temperature: 250°F / 121°C • O-ring Temperature Rating: -40°F to +300°F / -40°C to +149°C • Maximum Rated Pressure (MRP): 700 psi / 48 bar • Minimum Burst Pressure (UL 207): 2,100 psi /145 bar • Vacuum Pressure Capability: <200 Microns • External Helium Leak Rate: <7.