Still the Same Great Fittings. Still the Right Choice. Press fittings specifically engineered to join tube in high-pressure HVAC/refrigeration systems. The familiar RLS stamp guarantees a leak-free connection! www.rlspressfittings.
Look For The Mark! TABLE OF CONTENTS Introduction.........................................................................2-5 Compatible with Drawn and Couplings and Slip Couplings................................................ 6 Annealed Copper Tubing made to 90° Elbows and 90° Street Elbows......................................... 7 ASTM B88 (Types L & K), ASTM 45° Elbows and Tees.............................................................. 8 B280 and ASTM B1003. Reducers and Reducing Bushings.
RLS® Press Fittings RLS press fittings were specifically designed and engineered to join copper tube in high-pressure HVAC and refrigeration systems. Our patented RLS fittings are fully registered and listed to UL207 – for pressures up 700 PSI. These first-of-their-kind fittings connect quickly and easily using an RLS approved press tool and jaws, replacing the time-consuming practice of manually brazing joints. The pressing procedure is similar to the one used with water press fittings.
RLS® Press Fittings As easy as 1-2-3! The RLS connection process just couldn’t be any easier, with minimal training and experience required. It offers a simple, yet effective and economical, way to make leak-free copper tube connections. 1. Insert the tube in the fitting In a matter of seconds, a permanent and reliable mechanical joint is made, without the dangers of heat or flammable gas. Tube ends are prepped in the same way as brazing. THE RLS ADVANTAGE 2.
All RLS products are approved for use with the following refrigerants: R-32 R-125 R-134a R-143a R-152a R-227ea R-290 R-404A R-407A R-407B R-407C R-407F R-407G R-407H R-410A R-417A R-421A R-422A R-422B R-422C R-422D R-424A R-427A R-434A R-437A R-438A R-442A R-444A R-444B R-445A R-446A R-447A R-448A R-449A R-449B R-449C R-450A R-451A R-451B R-452A R-452B R-452C R-453A R-454A R-454B R-454C R-455A R-456A R-457A R-458A R-507A R-513A R-513B R-515A R-515B R-60
COUPLINGS DIMENSIONS Couplings D B A Size (Inch) Part Number 1/4 C Description A B C D Inch mm Inch mm Inch mm Inch 3011040400111 0.26 6.6 0.34 8.6 0.45 11.4 0.95 mm 24.1 5/16 3011050500111 0.32 8.2 0.40 10.2 0.52 13.2 0.93 23.6 3/8 3011060600111 0.39 9.8 0.47 11.8 0.59 15.0 0.98 24.9 1/2 3011080800111 0.51 13.0 0.59 15.0 0.73 18.5 1.25 31.8 5/8 3011101000111 0.64 16.1 0.74 18.7 0.89 22.6 1.24 31.5 3/4 3011121200111 0.76 19.3 0.88 22.
ELBOWS A DIMENSIONS 90° Elbows D E B C Description Size (Inch) Part Number A B C D E Inch mm Inch mm Inch mm Inch mm Inch 1/4 3031040400111 0.26 6.6 0.34 8.6 0.45 11.5 2.01 51.1 0.68 mm 17.3 5/16 3031050500111 0.32 8.2 0.40 10.2 0.52 13.1 2.13 54.1 0.81 20.6 3/8 3031060600111 0.39 9.8 0.47 11.8 0.59 14.9 2.27 57.7 0.93 23.6 1/2 3031080800111 0.51 13.0 0.59 15.0 0.73 18.6 2.88 73.2 1.18 30.0 5/8 3031101000111 0.64 16.1 0.74 18.7 0.
ELBOWS/TEES DIMENSIONS D 45° Elbows A E C B Size (Inch) Part Number 3/8 Description A B C D E Inch mm Inch mm Inch mm Inch mm Inch mm 3081060600111 0.39 9.8 0.56 14.2 0.59 14.9 2.94 74.7 1.21 30.7 1/2 3081080800111 0.51 13.0 0.71 18.0 0.73 18.6 3.72 94.5 1.54 39.1 5/8 3081101000111 0.64 16.1 0.86 21.8 0.88 22.5 3.97 100.8 1.64 41.7 3/4 3081121200111 0.76 19.3 1.02 25.9 1.07 27.2 4.12 104.6 1.70 43.2 7/8 3081141400111 0.89 22.5 1.
REDUCERS/REDUCING BUSHINGS Reducers DIMENSIONS G C B Size (Inch) Part Number 3/8 to 1/4 A D E F Description A B C D E F G Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 3051060400111 0.39 9.8 0.47 11.8 0.59 14.9 0.26 6.6 0.34 8.6 0.45 11.5 2.24 mm 56.9 1/2 to 1/4 3051080400111 0.51 13.0 0.59 15.0 0.73 18.6 0.26 6.6 0.34 8.6 0.45 11.5 2.71 68.8 1/2 to 3/8 3051080600111 0.51 13.0 0.59 15.0 0.73 18.6 0.39 9.8 0.47 11.8 0.58 14.
FLARES/CAPS DIMENSIONS SAE/Euro Flares C A B D Size (Inch) Part Number 1/4 Description A B C D Inch mm Inch mm Inch mm Inch mm 3291040000111 0.26 6.6 0.45 11.5 1.38 35.1 0.56 14.2 3/8 3291060000111 0.39 9.8 0.59 14.9 1.38 35.1 0.58 14.7 1/2 3291080000111 0.51 13.0 0.72 18.2 1.13 28.7 0.75 19.1 5/8 3291100000111 0.64 16.1 0.87 22.0 1.48 37.6 0.75 19.1 3/4 3291120000111 0.76 19.3 1.05 26.6 1.48 37.6 0.80 20.
TOOLS AND JAWS Klauke® 19 kN Crimping Tool Benefits: • Lightweight design increases productivity • Short pressing cycle, 5-7 seconds • Compact design and 350° jaw rotation allows technician to install in tightspaces • Automatic piston return • Safety feature that allows crimp cycle to be interrupted – allows manual release of piston, if needed • High-quality, powerful Makita Li-Ion technology provides 100-150 crimps per charge, with charging time of just 15 minutes (2.
TOOLS AND JAWS Klauke® Tools and Jaws Tool Kit (no jaws) Includes the Klauke 19kN Crimping Tool and Accessory Kit (contents listed below) in a hard plastic carrying case. Part number: 3610000000000 Tool Kit with 3-Jaw Set Includes the Klauke 19kN Crimping Tool, 3 Jaws (3/8", 1/2", 7/8"), and Accessory Kit (contents listed below) in a hard plastic carrying case.
TOOLS AND JAWS RIDGID® Jaws RIDGID introduced North American plumbers to pressing nearly 20 years ago, and they take their industry leadership position seriously. The same is true of RLS. That’s why we’re proud to also partner with RIDGID to offer jaws for use with various RIDGID press tools that are compatible with RLS refrigerant press fittings. (RIDGID press tools are sold through RIDGID distributors.
TECHNICAL DATA Applications Agency Approvals and Certifications • High Pressure HVAC/R • Ethylene Glycol • Non-Potable Water • UL Listed: 207, SA#33958, SDTW (7) (Except where noted) Product Parameters • ISO 14903 Compliant • UL Listed: Approved Use For Field & Factory Installations • Continuous Operating Temperature: 250°F / 121°C • O-Ring Temperature Rating: -40°F to +300°F -40°C to +149°C • Maximum Rated Pressure (MRP): 700 psi / 48 bar • Minimum Burst Pressure (UL 207): 2,100 psi / 145 ba
ANCILLARY PRODUCTS RLS offers a selection of ancillary products that can complement our RLS press fittings on any job. From filter dryers to sight glasses to valves and more, you can purchase these items with confidence knowing that they’ll work perfectly with the RLS press fitting system. Contact your RLS representative or distributor for complete details.
About RLS RLS Group designed, engineered and introduced the first press-to-connect fittings for the HVAC and refrigeration industries in 2014. Since then then company has continued to expand its product line, regularly introducing new products and new sizes to meet market needs. Today, there are more than 5 million RLS fittings installed worldwide, with some in service for more tlhan 8 years.