User's Manual Part 4

46
TND
™
765 Fleet Edition User Manual
Hours of Service
At the end of your work day, you can inspect your vehicle, enter
a new DVIR entry, and go into Off-Duty mode. This will end your
current 14-hour On-Duty cycle.
The header of the screen may indicate critical compliance informa-
tion, such as, “You need to review DVIR record,” or “Don’t forget
to do a DVIR at the end of your work shift”.
indicates the DVIR has been certifi ed
indicates there is at least one outstanding defect
that should be reviewed
Add a post-trip DVIR
• Press DVIR tab.
• Press Add DVIR.
- Enter Trailer #.
- Select Yes if you found any defects during
your inspection.
- Select No if there are none.
• If there is a defect, enter the Location (General Truck
Condition, Truck Cab, etc.), the Defect and any Remarks
about the defect.
• Click Add.
Ending Your Trip
• A pop-up will appear asking if there are any more defects to report.
- Select Yes if you found additional defects.
- Select No if there are no more defects.
• If there is a defect, enter the Location (General Truck Condition,
Truck Cab, etc.), the Defect and any Remarks about the defect.
• Repeat this process for any additional defects.