User's Manual

Set My Duty Status
DriverConnect User Guide 32
© 2016-2017, Rand McNally, Inc.
Log Driving Time
When you start driving, you
automatically enter Driving (D) status
when connected to an ELD.
Since DriverConnect uses minute-by-
minute data for the most accurate drive
time logs, your status switches between
Driving and On Duty automatically.
 When the truck first reaches a set
threshold speed after going On Duty,
your status automatically changes to
Driving (D).
 Once you stop for 3 seconds, you
can change your status from Driving to
any other status.
 If you have been stopped for 5
minutes, and have not already switched
your status, the app automatically switches you to On Duty.
 When you reach the set threshold speed again, your status switches
back to Driving.
 If you stop the engine, the app automatically switches from Driving
to On Duty.
This automatic switching is designed to maximize your drive time while
maintaining compliance. By automatically switching back to On Duty
when you stop, you can gain valuable time back in your legal driving
limits. The threshold speed to transition in and out of driving can be
set by fleet manager on the DriverConnect portal.