User's Manual

Document:
TBD
Page:
7 of 42
ENGINEERING
Documentation
Revision:
1.6
Date:
24-May-17
Title:
TND540 Requirement
Proprietary and Confidential
This document contains confidential and property information which belongs to Rand McNally, Inc. This
document may not be copied, reproduced, or transmitted to others in any manner, nor may any use of the
information on this document be made, except for the specific purposes for which it is transmitted to the
recipient without prior written consent of Rand McNally, Inc.
● USB cable to connect to computer (data transfer + charging capabilities)
● Mount (same as 530/730)
● Quick Start Guide
● Customer Service Card
● Anti-theft labels
● Prop 65 warning
2.1.3 Limitations compared to TND740
● No Mic / No Voice recognition
● No Pogo Pin / No Smart Mount -> This implies that charging will be accomplished by connecting a
power source (car charger) directly to the device.
● No magnet-based alignment / attachment
2.2 Critical Parameters / Key features
● GPS - Time for GPS to report a location
● Display - should be visible in sunny environment (with default brightness)
● Touch - all part of the screen should respond to touch
● Audio quality - GPS voice announcement should sound natural and loud enough in noisy truck
environment
●
● SW Stability (criteria TBD)
● Hard Keys should have good tactile feel (with and without the protective Guard)
● Gold standard is OverDryve 7
2.3 System Requirements
2.3.1 Hardware System Requirements
The hardware system requirements are defined in the table below. In ODM comments, please fill in one of the
three comments listed below:
● Compliance by design
● Compliance by test
● N/A
Description TND540 HW Specification
ODM
Comments
Environmental
Operating Temperature -10 C to +60 C
PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.pdffactory.com