Quick Start Guide

4 5
TND
™
750 Quick Start GuideTND
™
750 Quick Start Guide
Your TND
™
750Install the Mount
NOTE: Follow all local laws and regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together and lock into place.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the vehicle's 12-volt power source.
8. Place and hold the mount suction cup against the mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and
does not block the driver's line of sight.
DC in
(power)
AUX out
TND
™
750 Smart Mount
Micro
USB
TND
™
750
Home
Power
Volume
Down Up
Micro
SD card
AUX
Port