Overview This is a digital HD (high definition) video camera recorder with the most advanced technology; this device is a common HD video camera as well as a professional driving recorder. It can record the high resolution image with the pixel as high as 2560X1080P/30fps ,2304X1296P/30fps,1920X1080P/60fps FULL HD and take the picture of 4 mega pixels. Using TF card as the storage device, compact size, low power consumption, HD camcorder can record more detailed perfect video image.
Feature Product features: ◎ 170 degree ultra wide angle lens. ◎2560X1080P/30fps, 2304X1296P/30fps, 1920X1080P/60fps FULL HD high quality resolution. ◎ Equipped with low light sensor, can get good video quality at night. ◎ Advanced H.264 video compression technology. ◎ 4 mega pixels. ◎ 2.7 inch high resolution LCD, can watch while shooting. ◎ Matching IR Light for supplementing light at night. ◎ Support HDMI high quality video transmission. ◎3 resolution forms can be changed for video recording.
Product Structure External GPS USB HDMI Reset Micro TF Photo/Delete Rec/OK LCD Power/ Ligths Mode Right /Microphone/ Fast Left/Slow/ Screensaver IR Speaker MIC Lens 3
External GPS Slide rail + card buckle: Install: position the DVR and the sliding rail of the GPS, sliding inside until you hearing a USB port connecting to car charger sound.
When power on, GPS auto search satellite. No GPS positioning, LCD screen display dynami c lower left corner of the yellow icon ; GPS positioning, LCD screen shows a Keyicon Functions green on the lower left corner. (Optional) MODE Key: to shift video recording, playback mode, system settings. To lock or unlock the file during recording. At playback mode, press “MODE” key to back to thumbnail status. Right / Left key:In Menu mode, used for menu selection; At thumbnail status to review videos/photo.
Operation Load and unload the battery 1. Battery indicators as below: Full Half Low Empty Battery Recharge 2. This device can be charged through connecting the USB terminal of computer as well as connecting charger.
Operation 1. Press the power key for 1 second to turn on/off the device. 2. For saving the power capacity of battery, to set the automatic off time in the menu, the device will turn off automatically when not any operation on the video recorder. Camcorder Mode 1. Press REC button to start the video recording, and then press REC button to stop the video recording. During the process, red icon will flash on the screen. 2.
Operation Language:set language. TV out:NTSC/PAL. Auto off:set idle time to power off the device. Format:Format the TF card. Stamp: Video recording/pictures whether add into the time and date, customer logo and speed info. Date:Use up or down key to change the digits and press OK to go to next item. Auto LCD off Time: set the time auto turn off the LCD screen; press any key to wake up the LCD screen. Reset system: to set the system parameter as the default value.
Specifications Sensor 4M CMOS sensor,1/3 inch light-sensing surface area Lens 4 fixed focus Lens, aperture 2.0, focus 3.4mm Zoom 2.7inch 16:9 LCD display Terminal: composite TV signal output NTSC/PAL High TFT LCD definition TV terminal interface: HDMI signal output. Max 1920X1080i50 or 1920X1080i60 AV (CVBS) Picture PG file format Maximum output pixel: 12.0 mega pixels Video output H.
FAQ Warning Notice Cannot take pictures or video clips. Check the TF card whether it’s locked or has insufficient space. Stop recording half way. Please check whether your TF card supports high-speed transmission (marked with C10). “File error” pops up in playback mode. Please format the TF card. No image on TV screen. Make sure AV or HDMI cable is correctly connected. Make sure TV is switched to correct mode. Video or pictures are blurry. Please clean up the lens.
GPS Player Install Instruction: (1) Firmware Installation Install the “Driver.exe” at CD disk. (2) Play the video Double-click the “Player.exe”,select the file and play it.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.