User manual

Plugs and Sockets
The mains cable provided with your notebook comes with a sealed
moulded plug so no wiring is required.
Always use the mains cable plug provided,
inserted into a standard
3-pin power socket only
. Sockets should be earthed through the
wiring system of the building and must be easily accessible.
Cables
Check the condition of all cables - and particularly mains cables -
regularly. If any are damaged, replace them immediately.
Place the notebook near to the socket to avoid trailing cables.
If you use an extension lead, make sure it is three-core and safely
earthed. Incorrect wiring can be fatal.
• CAUTION: To reduce the risk of fire, use only 26 AWG or
larger UL Listed or CSA certified Telecommunications Line
cord.
• CAUTION – Always disconnect all telephone lines from the wall
outlet before servicing or disassembling the equipment.
Ventilation and Dust Protection
Your RM Mobile One 945 notebook has a cooling fan outlet on the
base of the notebook. Always make sure that all the ventilation
outlets are not obstructed, to prevent your notebook from
overheating.
Unused expansion slots and unused disk drive bays should always
be covered with the supplied blanking plates. This will ensure the
correct airflow inside your notebook and keep dust out. Keeping the
blanking plates in place will also prevent electromagnetic
interference occurring between your notebook and other
equipment.