User`s guide

User’s Guide ADI-8 QS © RME

14. MIDI

The ADI-8 QS has a standard MIDI input and output, a 5-pin

DIN jack each. The MIDI I/O is used for:

• remote control of the ADI-8 QS, see chapter 10.2

• transmission of MIDI data and remote control commands over MADI, in case the optional I64

MADI Card has been fitted, see chapter 10.3.

15. Remote

This mini-DIN jack can only be used to connect the included remote control.

The 5 meter (16 ft) long cable is fixed to the Hardware Remote unit. More in-

formation on usage and functionality is found in chapter 10.1.

Note

: The Hardware Remote uses the function Global Output Level, see chapter 9.2. The vol-

ume can not be changed if this option is deactivated in the Setup menu.