User`s guide

58
User’s Guide ADI-8 QS © RME
19.3 Table
No. No. Name
Set
Val.
Val.
Resp. Data bytes
00h 0 Output Level x x 0..48 (see output level table)
01h 1 Trim Output Ch. 1 x x
4..28, 0.5dB steps, 4 = -6dB, 16 = 0dB,
28 = +6dB
02h 2 Trim Output Ch. 2 x x see above
03h 3 Trim Output Ch. 3 x x see above
04h 4 Trim Output Ch. 4 x x see above
05h 5 Trim Output Ch. 5 x x see above
06h 6 Trim Output Ch. 6 x x see above
07h 7 Trim Output Ch. 7 x x see above
08h 8 Trim Output Ch. 8 x x see above
09h 9 Trim Input Ch. 1 x x see above
0Ah 10 Trim Input Ch. 2 x x see above
0Bh 11 Trim Input Ch. 3 x x see above
0Ch 12 Trim Input Ch. 4 x x see above
0Dh 13 Trim Input Ch. 5 x x see above
0Eh 14 Trim Input Ch. 6 x x see above
0Fh 15 Trim Input Ch. 7 x x see above
10h 16 Trim Input Ch. 8 x x see above
11h 17 Setup 1 x x see setup 1 table
12h 18 Setup 2 x x see setup 2 table
13h 19 Setup 3 x x see setup 3 table
14h 20 Setup 4 x x see setup 4 table
15h 21 Lock / Sync Info 1 x see lock / sync table 1
16h 22 Lock / Sync Info 2 x see lock / sync table 2
17h 23 Lock / Sync Info 3 x see lock / sync table 3
18h 24 Mute Output 1..4 x x bit 0..3: 0 = normal operation, 1 = mute
19h 25 Mute Output 5..8 x x bit 0..3: 0 = normal operation, 1 = mute
1Ah 26 Reference Level x x 0..48, see output level table
1Bh 27 Setup 5 x x see setup 5 table
1Ch 28 Option 1 source x x 0 = Option 1,
1Dh 29 Option 2 source x x 1 = Option 2,
1Eh 30 Option 3 source x x 2 = Option 3,
1Fh 31 Option 4 source x x 3 = Option 4,
20h 32 Option 5 source x x 4 = Option 5,
21h 33 Option 6 source x x 5 = Option 6,
22h 34 Option 7 source x x 6 = Option 7,
23h 35 Option 8 source x x 7 = Option 8,
24h 36 ADAT 1 source x x 8 = ADAT 1,
25h 37 ADAT 2 source x x 9 = ADAT 2,
26h 38 AES source x x 10 = AES,
27h 39 Analog source x x 11 = Analog, 12 = n.c.
28h 40 (reserved) x x
29h 41 (reserved) x x
2Ah 42 (reserved) x x
2Bh 43 (reserved) x x
2Ch 44 Set bank no./Dev. ID x