User`s guide

30
User's Guide ADI-192 DD © RME
10. Technical Specifications
10.1 Inputs
AES/EBU
• 4 x XLR, transformer balanced, ground-free, according to AES3-1992
• High-sensitivity input stage (< 0.3 Vpp)
• SPDIF compatible (IEC 60958)
• Accepts Consumer and Professional format, copy protection will be ignored
• Single Wire: 4 x 2 channels 24 bit, up to 192 kHz
• Double Wire: 4 x 2 channels 24 bit 96 kHz, equalling 4 channels 192 kHz
• Double Wire: 4 x 2 channels 24 bit 48 kHz, equalling 2 channels 192 kHz
• Quad Wire: 4 x 2 channels 24 bit 48 kHz, equalling 2 channels 192 kHz
• Lock range: 28 kHz - 104 kHz, 162 kHz - 204 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
SPDIF (Front)
• as AES/EBU, but connected via TOSLINK
• Auto Input Detection: replaces AES input channels 1/2
ADAT Optical
• 2 x TOSLINK, according to Alesis specification
• Standard: 8 channels 24 bit, up to 48 kHz
• S/MUX: 2 x 8 channels 24 bit / 48 kHz, equalling 8 channels 24 bit 96 kHz
• S/MUX4: 2 x 8 channels 24 bit / 48 kHz, equalling 4 channels 24 bit 192 kHz
• Bitclock PLL ensures perfect synchronisation even in varispeed operation
• Lock range: 28 kHz – 54 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
TDIF
• 2 x D-sub 25 pin, according to TDIF-1
• Standard: 8 channels 24 bit, up to 48 kHz
• Double Wire: 2 x 8 channels 24 bit / 48 kHz, equalling 8 channels 24 bit 96 kHz
• Quad Wire: 2 x 8 channels 24 bit / 48 kHz, equalling 4 channels 24 bit 192 kHz
• Lock range: 30 kHz – 54 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
• BNC, not terminated (10 kOhm)
• Switch for internal termination 75 Ohm
• Automatic Double/Quad Speed detection and internal conversion to Single Speed
• SteadyClock guarantees super low jitter synchronization even in varispeed operation
• Transformer coupled, galvanically isolated input
• Not affected by DC-offsets within the network
• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
• Overvoltage protection
• Level range: 1.0 Vpp – 5.6 Vpp
• Lock range: 28 kHz – 220 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)