User`s guide

User’s Guide ADI-8 QS © RME

15.6 General

• Power supply: Internal switching PSU, 100 - 240 V AC, 40 Watts

• Typical power consumption: 23 Watts

• Maximum power consumption: < 30 Watts

• Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")

• Dimensions without rack ears/handles (WxHxD): 436 x 44 x 235 mm (17.2" x 1.73" x 9.3")

• Weight: 3 kg ( 6.6 lbs)

• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

• Relative humidity: < 75%, non condensing

15.7 Firmware

The ADI-8 QS is internally based on programmable logic. By re-programming of a little compo-

nent called Flash-PROM, both function and behaviour of the unit can be changed at any time.

At the time of writing this manual, the unit is shipped with firmware 1.1. The firmware version is

displayed after power on for about one second on the level meters of the ADI-8 QS.

Firmware 1.1: Initial release

The I64 MADI Card has its own firmware. ADI-8 QS M are shipped with firmware 20070217

(date code sticker).

15.8 MADI User Bit Chart

• RS-232: channels 1 to 9 (through mode active in the I64 MADI Card)

• ADC: channel 19

• MIDI: channel 56 (48k) / 28 (96k)