User`s guide

User’s Guide ADI-8 QS © RME

Setup 1

MSB /

7 0

6 MSB / 2 analog input: 0 = +4dBu, 1 = +13dBu, 2 = +19dBu

5 1 analog input: 3 = +24dBu, 4 = dig. Input

4 LSB / 0 (analog input)

3 MSB / 1 analog output: 0 = +4dBu, 1 = +13dBu,

2 LSB / 0 analog output: 2 = +19dBu, 3 = +24dBu

1 MSB / 1 limiter mode: 0 = off, 1 = digital,

LSB / 0 LSB / 0 limiter mode: 2 = analog, 3 = analog + digital

Setup 2

MSB /

7 0

6 follow clock: 0 = off, 1 = on

5 clock out: 0 = Fs, 1 = always single speed

4 MSB / 2 clock select: 0 = int. 44.1, 1 = int. 48, 2 = WCK

3 1 clock select: 3 = Option, 4 = AES, 5 = ADAT

2 LSB / 0 clock select

1 MSB / 1 clock range: 0 = single speed, 1 = ds, 2 = qs

LSB / 0 LSB / 0 clock range

Setup 3

MSB /

7 0

6 Auto-Device: 0 = off, 1 = on

5 Delay Compensation: 0 = off, 1 = on

4 MSB / 1 Peak Hold: 0 = off, 1 = auto reset,

3 LSB / 0 Peak Hold: 2 = manual, 3 = reset (tx only)

2 MSB / 1 Digital Input: 0 = Option, 1 = ADAT, 2 = AES

1 LSB / 0 Digital Input

LSB / 0 Lock Keys: 0 = unlock, 1 = lock

Setup 4

MSB /

7 0

6 MSB / 1 fx drive: 0..3 = 1..4

5 LSB / 0 (fx drive)

4 analog output dim: 0 = normal level, 1 = dim

3 direct level: 0 = disable, 1 = enable

2 enable trim: 0 = disable, 1 = enable

1 enable global level: 0 = disable, 1 = enable

LSB / 0 display mode: 0 = normal, 1 = auto gain reduction

Setup 5

MSB /

7 0

LSB / 0 dd: 0 = di, 1 = fx