User`s guide

User's Guide Advanced Remote Control © RME

1. Introduction

Thank you for choosing the RME Advanced Remote Control. This wired remote has been de-

signed for direct access to the most frequently used actions and commands required in a stu-

dio’s daily work. Its extremely flexible configuration through TotalMix FX will simplify workflow

and greatly increase the usability of the RME interface in any real world situation.

2. Package Contents

• Advanced Remote Control with 5 m (16.4 ft) cable attached

• This manual

3. System Requirements

The Advanced Remote Control (ARC) can be used with all RME Fireface UCX. It can also be

used with all RME Fireface UFX with a serial number 23241707 (built after June 2011) or

higher. Upcoming interfaces that feature an Advanced Remote Control connector will also be

compatible.

Users that own a Fireface UFX with a serial number below 23241707 have to send their UFX to

their distributor as it requires a hardware modification to be fully compatible to the Advanced

Remote Control. This modification is not free of charge.

4. Brief Description and Characteristics

• Solid metal case in RME’s user-friendly Babyface design

• 5 meter cable length for comfortable handling and positioning

• Full control of many TotalMix operations, like volume, DIM, Speaker selection etc.

• Special functionality for stand-alone mode operation of UFX/UCX

5. Technical Specifications

• Power supply: by main unit via the ARC cable

• Typical power consumption: 0.1 Watts

• No internal battery

• Dimensions (WxHxD): 100 x 25 x 132 mm (4.0" x 1.0" x 5.2")

• Attached cable length: 5 m (16.4 ft)

• Weight: 0.5 kg (1.1 lbs)

• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

• Relative humidity: < 75%, non condensing