Specifications

3-1
Chapter 3 - Repeater Control
The CAT-1000B has a maximum capacity of 64 remote control channels. These channels
are segregated into eight zones according to their function. In addition to being
controlled by the scheduler, these channels can be manually controlled by DTMF
commands on the repeater, transceiver or telephone inputs.
Interrogation of Repeater Control Status by Radio
Key-up and send the control operator prefix number followed by the zone number and a
zero. Un-key and the voice will read back the channels that are turned on in that
zone. Example: "ONE TWO FIVE ON." If all the channels are turned off, the voice will
say: "ALL CLEAR."
Changing Repeater Control Status by Radio
To change the status of a channel, key-up and send the control operator prefix number
followed by the zone number, channel number and a [1] to turn the channel ON or a [0]
to turn the channel OFF. Un-key and the voice will read back the zone, channel number
and control activity. The voice will say: "ONE ONE ON." or "THREE FIVE OFF." Example:
With a control operator prefix of 100, turn Zone 3 Channel 5 ON
┌───────────── Zone (1 through 8)
Prefix────┐ │ ┌───────── Channel (1 through 8)
│ │ │ ┌───── Activity (0=OFF 1=ON 2=MOMENTARY*)
Key-up and send: 100 3 5 1
Un-key and the voice will say: "THREE FIVE ON."
* The momentary command is limited to Zone 8 channels only.
Changing Repeater Control Status By Telephone
Call the repeater by telephone. When the CAT-1000B answers a beep will be heard.
Enter the control operator prefix code followed by a (#) pound. The voice will say:
"CONTROL READY." You need only enter the Zone number, Channel number and a (1) to
turn the channel ON or a (0) to turn the channel OFF followed by the (#) pound. It is
not necessary to enter the control operator prefix number before each command when
controlling by phone. To terminate control send [*0#].
Repeater Control Channels
Zone 1
1. Repeater Transmitter Enable*
2. Repeater CTCSS Enable
3. DTMF Access Enable
4. Repeater CTCSS Override Enable
5. Turn on Delay Enable
6. DTMF Window Enable
7. DTMF Muting Enable
8. Control Operator CTCSS Enable
Zone 2
1. Repeater Timeout Timer Enable*
2. Squelch Tail Enable*
3. Scheduler Enable*
4. DTMF Pad Test Enable*
5. LiTZ Emergency Alert Enable*
6. Grandfather Clock Sleep Enable
7. Courtesy Beep Enable*
8. Talk Over Voice Synthesizer Enable