Specifications

3-2
Zone 3
1. Repeater ID #1 (At Rest) Enable*
2. Repeater ID #2 (Active) Enable*
3. Squelch Tail Message #1 Enable
4. Squelch Tail Message #2 Enable
5. Dropout Message #1 Enable
6. Dropout Message #2 Enable
7. Time of Day Request Enable*
8. Grandfather Clock Enable*
Zone 4
1. Autopatch Enable*
2. Autopatch Timeout Timer Enable*
3. Long Distance Enable
4. Emergency 911 Enable*
5. Speed Dial Enable*
6. Phone Number Read Back Enable*
7. Autopatch Radio Mute Enable
8. Autopatch Pre-Dial Enable
Zone 5
1. Autopatch Pulse Dial Enable
2. Reverse Autopatch Enable*
3. Long Distance Dial (1) Enable
4. Telephone Off Hook Enable
5. Telephone Ring Announcer Enable
6. Modem Auto Answer Enable
7. DTMF Generator Enable*
8. DTMF Regenerator Enable
Zone 6
1. Transceiver Receive Enable*
2. Transceiver Transmit Enable*
3. Transceiver Repeat Enable
4. Transceiver CTCSS Enable
5. Transceiver Voice Enable*
6. Transceiver Auto Disconnect Enable
7. Computer Interface Enable
8. Ring Detector Enable*
Zone 7
1 Input #1 Enable*
2 Input #2 Enable*
3 Input #3 Enable*
4 Input #4 Enable*
5 Input #5 Enable*
6 Input #6 Enable*
7 Input #7 Enable*
8 Input #8 Enable*
Zone 8
1. Output #1 Enable*
2. Output #2 Enable*
3. Output #3 Enable*
4. Output #4 Enable*
5. Output #5 Enable*
6. Output #6 Enable*
7. Output #7 Enable*
8. Output #8 Enable*
* During initialization these control channels are set to the enable position.