Specifications

4-5
Voice Message Selection
Key-up and enter the VOICE prefix followed by the message number. The CAT-1000B will
key the transmitter and play the message stored at that location. Example: With a
VOICE prefix number of 700, play message stored at table position seven.
Key-up and enter: 7 0 0 0 7
└─┼─┘ └─┴──── Voice Message Number
└─────────── Voice Prefix Number
DVR Track Selection
Key-up and enter the DVR prefix followed by the track number. The CAT-1000B will key
the transmitter and play the message pre-recorded at that track. Example: With a DVR
prefix number of 725, play track seven.
Key-up and enter: 7 2 5 0 7
└─┼─┘ └─┴──── DVR Track Number
└─────────── DVR Prefix Number
DVR Signal Report
Key-up and enter the DVR prefix followed by a [*]. Un-key, the voice will say: "START
TEST NOW". Key-up and record a seven second message. Un-key and the message will
play back. You instantly know how your signal sounds through the repeater. This
feature does not work with the Ming digital voice recorder.
Paging Tone Selection
Key-up and enter the PAGING TONE prefix followed by the table location number. The
CAT-1000B will key the transmitter and transmit the tones stored at that location.
Example: With a PAGING TONE prefix number of 750, send tone pair stored at table
position five.
Key-up and enter: 7 5 0 0 5
└─┼─┘ └─┴──── Paging Tone Memory Number
└─────────── Paging Tone Prefix Number
Macro Execute
A macro is a series of commands, defined by the repeater owner. Macros permit the
owner to customize certain aspects of repeater operation. Once the CAT-1000B decodes
the macro number, the commands will execute in the order they were stored within the
macro.
DTMF Tone Generator
Key-up and enter the DTMF Generator Prefix number followed by the table location
number. The controller will key the transmitter and send the DTMF tones stored at
that location. Example: With a DTMF tone generator prefix number of 300, send the
DTMF command stored at table position seven.
Key-up and enter: 3 0 0 0 7
└─┼─┘ └─┴──── DTMF Generator Memory Number
└─────────── DTMF Generator Prefix Number
Memory Files
Space is provided for eight memory files. Each memory file includes: control channel
settings, codes, timer values, and voice messages one through twelve. When the CAT-
1000B is initialized, all files are filled with the default values. The memory recall
prefix number will permit the user to copy into active memory a file from storage. To
store active memory as a memory file, you must unlock the CAT-1000B and use the [*19X]
programming commands.