Specifications

Foreword
For your convenience, this manual is divided into seventeen chapters. A brief
description of each chapter and its contents are listed below.
Chapter 1
- This chapter describes some of the CAT-1000B features. Also included are
the technical specifications.
Chapter 2
- This chapter describes the various configurations for the CAT-1000B,
dipswitch settings and modes of operation.
Chapter 3
- This chapter describes how to control the CAT-1000B. The control operator
prefix code [100] must precede each control command.
Do not unlock the CAT-1000B when
changing control channels.
Chapter 4
- This chapter describes how to use the features of the CAT-1000B. These
are considered repeater user commands.
Chapter 5
- This chapter describes how to program the CAT-1000B with DTMF tones.
During programming the CAT-1000B must be un-locked.
Key-up and enter [1234567].
Chapter 6
- This chapter describes how to program the CAT-1000B through the 300 baud
modem or the local RS-232 computer port.
Chapter 7
- This chapter describes how to interface the CAT-1000B to a RF package and
how to adjust the audio levels.
Chapter 8
- This chapter describes how to connect the CAT-1000B through the Doug Hall
RBI-1 Interface unit to a Kenwood transceiver.
Chapter 9
- This chapter describes how to connect three transceivers to the remote
base input of the CAT-1000B using the optional RLS-1000B Remote Link Switch.
Chapter 10
- This chapter describes how to connect and set-up the DL-1000C Audio Delay
to the CAT-1000B.
Chapter 11
- This chapter describes how to connect and set-up the DR-1000 Digital
Voice Recorder to the CAT-1000B.
Chapter 12
- This chapter describes the Peet Brothers Ultimeter ® 100, 800 or 2000
weather station and how it interfaces to the CAT-1000B.
Chapter 13
- This chapter contains a list of the vocabulary words used to program the
voice synthesizer.
Chapter 14
- This chapter contains PC board layouts for part location on both the CAT-
1000B, RLS-1000, DL-1000C and DR-1000 boards.
Chapter 15
- This chapter contains the schematics diagrams (4) sheets for the CAT-
1000B controller.
Chapter 16
- This chapter contains part list for the CAT-1000B, RLS-1000, DL-1000C and
the DR-1000.