Specifications

5-5
┌───────────────Day of Week (1-7)
Minutes (0-59)───────────┐ │ ┌────────────Day of Month (01-31)
Hours (0-23)────────┐ │ │ │ ┌─────────Month of Year (01-12)
*21 14 55 2 25 01
Day of Week Table
Day of Week Sun=1 Mon=2 Tue=3 Wed=4 Thr=5 Fri=6 Sat=7
Voice Synthesizer Memory Storage
Space is provided for forty user programmable messages of up to 31 words each.
Repeater ID #1 and ID #2 can be turned on at the same time. This is also true for the
Squelch Tail and Drop Out messages. The Squelch Tail and Drop Out messages will
alternate.
Send Synthesized Voice Message Locations (01-40)
Key-up and send [*30XX]. Un-key and the voice synthesizer will say the message stored
at memory location "XX".
Program Synthesized Voice Message Locations (01-40)
Key-up and send [*31XX], followed by the three digit numbers that represents the words
required to construct the message. Memory space is provided for thirty-one entries.
Refer to Chapter 11, Voice Vocabulary Word List. Example: Load Repeater ID #1 with
"W4XYZ Repeater"
Message Number──┐ W 4 X Y Z ┌──Repeater
Programming──┐ │ │ │ │ │ │ │
Command *31 01 890 004 920 930 950 746
VOICE MESSAGE NUMBER TABLE
01 Repeater ID #1 02 Repeater ID #2
03 Squelch Tail #1 04 Squelch Tail #2
05 Transmitter Drop #1 06 Transmitter Drop #2
07 Time of Day 08 Grandfather Clock
09 Transceiver Disconnect 10 Transceiver Connect
11 Courtesy Tone Repeater 12 Courtesy Tone Transceiver
13 Repeater Time Out 14 Repeater Time In
15 A/P Disconnect 16 Transceiver Auto Disconnect
17 Message #17 18 Message #18
19 Message #19 20 Message #20
21 Message #21 22 Message #22
23 Message #23 24 Message #24
25 Message #25 26 Message #26
27 Message #27 28 Message #28
29 Message #29 30 Message #30
31 Message #31 32 Message #32
33 Message #33 34 Message #34
35 Message #35 36 Message #36
37 Message #37 38 Message #38
39 Message #39 40 Message #40