Specifications

5-15
User Speed Dial Memory
This memory area is reserved for storage of three hundred phone numbers with call
letter identification. The memory is divided into three groups of one hundred numbers
each. Space is provided for a sixteen-digit phone number with an ID of eleven
numbers, letters or words from the Voice Vocabulary Word List.
Read User Speed Dial (Block 1) Locations (00-99)
Key-up and send [*70XX]. Un-key and the voice synthesizer will read back the status
of the memory location. If there is no number stored at that memory location, the
voice will say: "POSITION XX IS CLEAR." If a User Speed Dial is stored at that memory
location, the voice will read the phone number and ID.
Program User Speed Dial (Block 2) Locations (00-99)
Key-up and send [*74XX] followed by up to a sixteen-digit phone number, a [*]
separator and up to eleven words from the voice synthesizer vocabulary list. Un-key
and the voice will say: "CONTROL OK." Example: 978-6171 W4XYZ (Store at table
position 15).
Phone Number──┐ W 4 X Y Z
Table Position─────┐ │ │ │ │ │ │
*74 15 9786171 * 890 004 920 930 950
To program a dialing delay, enter a [**]. Example: 9 978-6171 W4XYZ (Store at table
position 5).
Phone Number──┐ W 4 X Y Z
Table Position─────┐ │ │ │ │ │ │
*74 05 9 ** 9786171 * 890 004 920 930 950
Pre-Dial Number──────┘ └─────One Second Dialing Delay
Erase User Speed Dial (Block 3) Locations (00-99)
Key-up and send [*78XX]. Un-key and the voice will say: "POSITION XX IS CLEAR"
COMMAND DEFINITION
*70XX READ USER SPEED DIAL (BLOCK 1)
*71XX PROGRAM USER SPEED DIAL (BLOCK 1)
*72XX ERASE USER SPEED DIAL (BLOCK 1)
*73XX READ USER SPEED DIAL (BLOCK 2)
*74XX PROGRAM USER SPEED DIAL (BLOCK 2)
*75XX ERASE USER SPEED DIAL (BLOCK 2)
*76XX READ USER SPEED DIAL (BLOCK 3)
*77XX PROGRAM USER SPEED DIAL (BLOCK 3)
*78XX ERASE USER SPEED DIAL (BLOCK 3)
Emergency Speed Dial Memory
This memory area is reserved for ten phone numbers with identification. Space is
provided for up to a sixteen-digit phone number with an identification of eleven
numbers, letters or word from the voice synthesizer word list.
Read Emergency Speed Dial Locations (0-9)
Key-up and send [*80X]. Un-key and the voice will read back the status of the memory
location. If there is no number stored at that memory location, the voice will say:
"POSITION X IS CLEAR." If an Emergency Speed Dial is stored at that memory location,
the voice will read the phone number and identification.