Specifications

5-16
Program Emergency Speed Dial Locations (0-9)
Key-up and send [*81X] followed by a seven-digit phone number, a [*] separator and up
to eight words from the voice vocabulary list. Un-key and the voice will say:
"CONTROL OK." Example: 525-2500 FIRE DEPARTMENT (Store at table position 3)
Phone Number─┐ FIRE ┌───DEPARTMENT
│ │ │
*813 5252500 * 381 321
Erase Emergency Speed Dial Locations (0-9)
Key-up and send [*82X]. Un-key and the voice will say: "POSITION X IS CLEAR"
Telephone Lockout Memory
This memory area is reserved for storage of twenty phone numbers or phone number
prefixes. Space is provided for an eleven-digit number.
Read Lock-Out Number Locations (01-20)
Key-up and send [*83XX]. Un-key and the voice synthesizer will read back the phone
number stored at that memory location. If there is no number stored at that memory
location, the voice will say: "POSITION XX IS CLEAR."
Program Lock-Out Number Locations (01-20)
Key-up and send [*84XX] followed by the seven-digit phone number. Un-key and the voice
will say: "CONTROL OK." Example: Lockout number 555-1212. (Store at table position 3)
Program Command ──┐ ┌────Phone Number
*8403 5551212
Example: Lockout all numbers with the 976 Prefix. (Store at table position 17)
Program Command ──┐ ┌────Phone Number
*8417 976****
Example: Lockout all three digit numbers. (Store at table position 5)
Program Command ──┐ ┌────Phone Number
*8405 ***
Erase Lock-Out Number Locations (01-20)
Key-up and send [*85XX]. Un-key and the voice will say: "POSITION XX IS CLEAR"
Area Code Memory
Memory space is provided for a twenty-position look-up table. This table stores area
codes that may be direct dialed on the repeater autopatch. This feature may be
necessary when the repeater is located on an area code border zone.
Read Area Code Number Location (01-20)
Key-up and send [*86XX]. Un-key and the voice will read back the area code number
stored at that memory location. If there is no number stored at that memory location,
the voice will say: "POSITION XX IS CLEAR."
Program Area Code Number Location (01-20)
Key-up and send [*87XX] followed by the three-digit area code number. Un-key and the
voice will say: "CONTROL OK." Example: Load area code number 305. (Store at table
position 3).
Program Command ──┐ ┌────Area Code Number
*87 03 305
└──────────Table Position
Erase Area Code Number Location (01-20)
Key-up and send [*88XX]. Un-key and the voice will say: "POSITION XX IS CLEAR"
Pre-Dial Number
When the CAT-1000B is initialized, the pre-dial number is loaded with "9". If Zone 4
Channel 8 is enabled, this number will precede all manually dialed phone numbers.
Memory space is provided for a pre-dial number of up to seven digits.