Specifications

ManualsBrandsRME Audio ManualsMusical equipmentAEB4/8-1

5-17

Read Pre-Dial Number

Key-up and enter [*89]. Un-key and the voice will read back the number.

Program Pre-Dial Number

Key-up and enter [*89] followed by the number. Space is provided for a pre-dial

number of up to seven digits. Example: to program the number "7", key-up and enter

[*897]. Un-key and the voice will say: "CONTROL OK".

Suppress Caller ID

To suppress caller ID key-up and enter [*89*67], un-key and the voice will say:

"CONTROL OK".

Audio Test Tone

The CAT-1000B will generate a 1000Hz test tone. This tone is use as a reference when

setting audio levels. To activate the tone, key-up and enter [*90]. The frequency of

the tone is fixed. The length of the tone is determined by the setting of the Audio

Test Tone Timer [*616*].

Courtesy Tone

Memory space is provided for ten custom courtesy tones. Each tone can consist of up

to three different tone frequencies of various lengths and separations.

┌──────┐ ┌──────┐ ┌──────┐

───┤TONE A├───┤TONE B├───┤TONE C├───

└──────┘ └──────┘ └──────┘

│ │ │ │ └─────Frequency & Length

Frequency & Length ──────┘ │ │ └──────────Delay between B & C

Delay between A & B────────────┘ └────────────────Frequency & Length

Send Courtesy Tone Location (0-9)

Key-up and send [*91X]. Un-key and the CAT-1000B will transmit the courtesy tone.

"X" represents the courtesy tone table location. After initialization, only courtesy

tones 0 and 1 are loaded with default tones.

Program Courtesy Tone Location (0-9)

Key-up and send [*92X], followed by the frequency, duration and separation from the

Courtesy Tone table. This programming command is used to develop ten custom courtesy

tones 160 through 169. The tone created with the [*925] programming command is

identified as tone "165". Example: Program courtesy tone table location 5 with a tone

of 1000Hz and duration of 150 milliseconds.

┌──────Tone #1 Frequency

Table Position─────┐ │ ┌────Tone #1 Duration

Programming Command─┐ │ │ │ ┌──Time Separation

*92 5 6 3 0 * 0 0 0 * 0 0

Tone #2 Frequency─────────┘ │ │ │ └──Tone #3 Duration

Tone #2 Duration────────────┘ │ └────Tone #3 Frequency

Time Separation───────────────┘

To program a multiple courtesy tone, key-up and send [*92X], followed by the desired

tone frequencies, durations and separations. Example: Program courtesy tone table

location 1 with a three-frequency tone.

┌───────┐ SEPARATION ┌───────┐ SEPARATION ┌───────┐

│TONE A│ ┌───────┐ │TONE B│ ┌───────┐ │TONE C│

────┤800 Hz├──┤50mSEC ├──┤1000 Hz├──┤100mSEC├──┤1200 Hz├───

│100mSEC│ └───────┘ │150mSEC│ └───────┘ │200mSEC│

└───────┘ └───────┘ └───────┘