Specifications

13. Key-up and send [*3101], followed by the three digit numbers that represents
your call letters for voice ID #1. Refer to Chapter 13, Voice Vocabulary Word
List. Example: Load Repeater ID #1 with "W4XYZ Repeater"
Message Number──┐ W 4 X Y Z ┌──Repeater
Programming──┐ │ │ │ │ │ │ │
Command *31 01 890 004 920 930 950 746
14. Key-up and send [*3102], followed by the three digit numbers that represents
your call letters for voice ID #2.
15. Key-up and send [*341], followed by the two digit numbers that represents your
call letters for CW ID #1. Refer to the CW ID programming table. Example:
Load the CW ID memory buffer with W4XYZ/R.
Programming──┐ W 4 X Y Z / R
Command │ │ │ │ │ │ │ │
*341 8 2 32 04 33 34 35 36 27
16. Key-up and send [*342], followed by the two digit numbers that represents your
call letters for CW ID #2.
CW ID PROGRAMMING TABLE
00=0 06=6 12=C 15=F 21=L 27=R 33=X
01=1 07=7 13=D 16=G 22=M 28=S 34=Y
02=2 08=8 14=E 17=H 23=N 29=T 35=Z
03=3 09=9 15=F 18=I 24=O 30=U 36=/
04=4 10=A 16=G 19=J 25-P 31=V
05=5 11=B 17=H 20=K 26=Q 32=W
17. To read the time, key-up and send [*20]. Un-key, the voice will read the time,
day of week, month and day of month.
18. To set the clock, key-up and send [*21] followed by the hours, minutes, day of
week, day of month, and month of year. Un-key and the voice will say "CONTROL
OK." Example: 2:55 PM Monday January 25th. All entries must be double digit,
except the day of week.
┌───────── Day of Week (1-7)
Minutes (00-59)───────────┐ │ ┌────── Day of Month (01-31)
Hours (00-23)────────┐ │ │ │ ┌─── Month of Year (01-12)
*21 14 55 2 25 01
19. Key-up and send [*0]. Un-key, the controller will lock-up and the voice will
say: "MANUAL EXIT." The CAT-1000B will lock-up automatically when the
programming timer expires. The voice will say: "TIMER EXIT."
20. Program a new seven digit UNLOCK code. Set dipswitch #8 to ON and the voice
will say: "ENTER CONTROL." Key-up and enter a seven-digit number. Un-key, if
the number is accepted, the voice will say: "DATA INPUTS OK." If rejected, the
voice will say: "ENTER CONTROL." Key-up and enter the seven-digit number again.
Set dipswitch #8 to the OFF position.
21. DTMF muting is a feature that prevents your DTMF tones from being transmitted.
To enable this feature, key-up and enter [100171]. The voice will say: "ONE
SEVEN ON."
22. To test your DTMF keypad, key-up and enter [3751234567890*#ABC]. The voice will
read back all the numbers that were decoded.
23. To check the time, key-up and enter [400].