Specifications

6-5
Remote Base Frequencies
To program a remote base memory
location, from the remote base
frequency window, place the hand
on the remote base frequency
window, place the hand on the
frequency cell to be programmed
and double click. The frequency
position window will appear.
Place the arrow in the frequency
cell and click on the frequency
and click on the frequency
numbers to advance the frequency
to the desired setting. Place
the arrow in the TX OFFSET box
and click to select MINUS, PLUS
or SIMPLEX offset. Place the
arrow in the POWER box and click
on the desired POWER setting.
Place the arrow in the CTCSS box
and click to select ON. Place
the arrow in the CTCSS cell and
click on the CTCSS tone frequency
numbers to advance the CTCSS tone frequency to the desired setting. Click OK to return
to the REMOTE BASE FREQUENCY window.
Scheduler
From the scheduler window, place the hand on the TIME cell and double click. The
SCHEDULER POSITION window will appear. Place the hand on the COMMAND cell and double
click. The KEYPAD window will appear. Use the keypad to enter the COMMAND and click
OK. Place the hand on the SCHEDULED TIME cell and double click. Use the keypad to
enter the time and click OK.