User`s manual

Page 78
Voyager User’s Manual - MIDI
Page 79
Voyager User’s Manual - Appendices
SECTION CONTROL FUNCTION CC VALUE/RANGE
Mixer
EXTERNAL (see NOTE) Adjusts the level of the external audio signal 14 MSB, 46 LSB -
EXTERNAL SWITCH Toggles the external audio ON/OFF 81 0-63 OFF, 64-127 ON
OSCILLATOR 1 Adjusts the level of oscillator 1 15 MSB, 47 LSB -
OSCILLATOR 1 SW Toggles oscillator 1 ON/OFF 82 0-63 OFF, 64-127 ON
OSCILLATOR 2 Adjusts the level of oscillator 2 16 MSB, 48 LSB -
OSCILLATOR 2 SW Toggles oscillator 2 ON/OFF 83 0-63 OFF, 64-127 ON
OSCILLATOR 3 Adjusts the level of oscillator 3 17 MSB, 49 LSB -
OSCILLATOR 3 SW Toggles oscillator 3 ON/OFF 84 0-63 OFF, 64-127 ON
NOISE Adjusts the level of noise 18 MSB, 50 LSB -
NOISE SWITCH Toggles noise ON/OFF 85 0-63 OFF, 64-127 ON
Filter
CUTOFF Adjusts the lter cutoff frequency 19 MSB, 51 LSB -
SPACING Adjusts the lter spacing parameter 20 MSB, 52 LSB -
RESONANCE Adjusts the lter resonance parameter 21 MSB, 53 LSB -
KB AMOUNT Adjusts the amount of pitch CV affecting the
cutoff
22 MSB, 54 LSB -
MODE Toggles the lter mode between LP/LP and
HP/LP
86 0-63 OFF, 64-127 ON
Envelope Generator
FILTER ENV ATTACK Adjusts the lter envelope attack time 23 MSB, 55 LSB -
FILTER ENV DECAY Adjusts the lter envelope decay time 24 MSB, 56 LSB -
FILTER ENV SUSTAIN Sets the lter envelope sustain level 25 MSB, 57 LSB -
FILTER ENV RELEASE Adjusts the lter envelope release time 26 MSB, 58 LSB -
AMOUNT TO FILTER Adjusts the amount of lter envelope affecting
the cutoff
27 MSB, 59 LSB -
VOLUME ENV ATTACK Adjusts the volume envelope attack time 28 MSB, 60 LSB -
VOLUME ENV DECAY Adjusts the volume envelope decay time 29 MSB, 61 LSB -
VOL ENV SUSTAIN Sets the volume envelope sustain level 30 MSB, 62 LSB -
VOL ENV RELEASE Adjusts the volume envelope release time 31 MSB, 63 LSB -
ENV GATE SWITCH Toggles the envelope gate between Keyboard
and ON/EXT
87 0-63 OFF, 64-127 ON
Vol
MASTER VOLUME Adjusts the master volume level 7 MSB, 39 LSB -
The Voyager’s MIDI CC data assignments
When the EXTERNAL SWITCH is set to OFF, the EXTERNAL control does not
transmit MIDI CC’s.