User`s guide

User's Guide DIGI96/8 PST © RME

5. Technical Specifications

5.1 Digital

• Ultra-low jitter S/PDIF: < 1 ns in PLL mode (44.1 kHz, optical in)

• Ultra-low jitter ADAT: < 2 ns in PLL mode (44.1 kHz, optical in)

• Input PLL ensures zero dropout, even at more than 40 ns jitter

• Bitclock PLL for trouble-free varispeed in ADAT mode

• High-sensitivity input stage (< 0.2 Vss input level)

• Output voltage Consumer 0.8 V, Professional 1.6 V

• Supported sample rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 kHz and variable (word clock)

5.2 Analog

• Input sensitivity adjustable through jumper +4 dBu / -10 dBV

• Dynamic range input: 105 dB (RMS unweighted, unmuted), 109 dBA

• THD+N input: < -100 dB / < 0.001 %

• Frequency response AD, -0.1 dB: 10 Hz - 20.3 kHz (sf 44,1 kHz)

• Frequency response AD, -0.5 dB: 5 Hz - 44.8 kHz (sf 96 kHz)

• Sample rates record: 32 / 44.1 / 48 / 64 / 88.2 / 96 kHz and variable (word clock)

• Input impedance: 10 kOhm

• Channel separation: > 110 dB

• Analogue output fixed +10 / +4 / -2 / -8 dBu @ 0 dBFS

• Dynamic range output: 108 dB (RMS unweighted, unmuted), 112 dBA

• THD+N output: -100 dB / 0.001%

• Frequency response DA, -0.1 dB: 20 Hz - 20.8 kHz (sf 44,1 kHz)

• Frequency response DA, -0.5 dB: 10 Hz - 44 kHz (sf 96 kHz)

• Sample rates playback: 32 / 44,1 / 48 / 64 / 88,2 / 96 kHz and variable (word clock)

• Ouput impedance: 75 Ohm

• Channel separation: > 110 dB

5.3 Digital Interface

• Inputs and outputs ground-free transformer coupled

• Connectors: optical (TOSLINK), coaxial (phono), internal (CD-ROM/Sync-In, Sync-Out)

• Formats: SPDIF, AES/EBU (Consumer/Professional), ADAT optical

5.4 Transfer Modes: Resolution / Bits per Sample

• 16 bit 2 bytes (stereo 4 bytes)

This mode is active when using the Sound Manager.

• 16 bit 2 bytes (stereo 4 bytes)

• 32 bit 4 bytes (stereo 8 bytes)

These modes are available when using ASIO. The 32 bit mode is used to provide 24 bit audio

resolution.