User`s guide

User’s Guide DMC-842 © RME

Delay Compensation has to be manually activated in each unit!

14.4 Differences serial MADI with I64 MADI Card and ADI-642

I64 MADI Card: Activate Auto ID in the first unit (ID of the master can be changed). All following

units become Slave, get a consecutive ID, and with this the according channel routing. If de-

sired, Delay Compensation has to be manually activated in each unit.

ADI-642: Activate ADC (Auto Delay Compensation) in the first unit (ID of the master is always

1). All following units become Slave, and compensate the respective delay automatically. The

routing is done according to the setting of the matrix. If Auto (Auto Channel Assignment) is acti-

vated in the first unit too, all following units get a consecutive ID, and with this the according

channel routing.

Mixed setups: Auto ID and Auto are compatible. In contrast (A)DC is automatic only with the

642. The DMC-842s require to activate Delay Compensation manually in each unit.