User`s guide

User’s Guide DMC-842 © RME
55
10h Setup 1 MSB / 7 0
6 MSB / 1
Analog Output Level: 0 = +13dBu, 1 =
+19dBu,
5 LSB / 0 Analog Output Level: 2 = +24dBu
4 MSB / 1 Clock Select: 0 = int., 1 = Option,
3 LSB / 0 Clock Select: 2 = AES, 3 = WCK
2 MSB / 1
Clock Range: 0 = single speed, 1 = ds,
2 = qs
1 LSB / 0 Clock Range
(d.c. for clock sel
> 0) LSB / 0 Int. Freq.: 0 = 44.1kHz, 1 = 48kHz
11h Setup 2 MSB / 7 0
6 Auto-Device: 0 = off, 1 = on
5 Delay Compensation: 0 = off, 1 = on
4 Digital Output Signal: 0 = i64, 1 = mic
3
Clock Out: 0 = always single speed, 1 =
Fs
2 Follow Clock: 0 = off, 1 = on
1 Peak Hold: 0 = off, 1 = on
LSB / 0 Lock Keys: 0 = unlock, 1 = lock
12h
Channel Lock /
Sync 1 MSB / 7 0
6 (reserved)
(Request only) 5
Input 2 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 4
Input 1 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 3 Input 2 Sync: 0 = no sync, 1 = sync
(Request only) 2 Input 2 Lock: 0 = unlock, 1 = lock
(Request only) 1 Input 1 Sync: 0 = no sync, 1 = sync
(Request only) LSB / 0 Input 1 Lock: 0 = unlock, 1 = lock
13h
Channel Lock /
Sync 2 MSB / 7 0
6 (reserved)
(Request only) 5
Input 4 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 4
Input 3 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 3 Input 4 Sync: 0 = no sync, 1 = sync
(Request only) 2 Input 4 Lock: 0 = unlock, 1 = lock
(Request only) 1 Input 3 Sync: 0 = no sync, 1 = sync
(Request only) LSB / 0 Input 3 Lock: 0 = unlock, 1 = lock