User`s guide

56
User’s Guide DMC-842 © RME
14h
Channel Lock /
Sync 3 MSB / 7 0
6 (reserved)
(Request only) 5
Input 6 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 4
Input 5 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 3 Input 6 Sync: 0 = no sync, 1 = sync
(Request only) 2 Input 6 Lock: 0 = unlock, 1 = lock
(Request only) 1 Input 5 Sync: 0 = no sync, 1 = sync
(Request only) LSB / 0 Input 5 Lock: 0 = unlock, 1 = lock
15h
Channel Lock /
Sync 4 MSB / 7 0
6 (reserved)
(Request only) 5
Input 8 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 4
Input 7 RX AES42: 0 = Mode 1, 1 =
Mode 2
(Request only) 3 Input 8 Sync: 0 = no sync, 1 = sync
(Request only) 2 Input 8 Lock: 0 = unlock, 1 = lock
(Request only) 1 Input 7 Sync: 0 = no sync, 1 = sync
(Request only) LSB / 0 Input 7 Lock: 0 = unlock, 1 = lock
16h Host Lock / Sync MSB / 7 0
6 (reserved)
(Request only) 5 WCK Sync: 0 = no sync, 1 = sync
(Request only) 4 WCK Lock: 0 = unlock, 1 = lock
(Request only) 3 AES Sync: 0 = no sync, 1 = sync
(Request only) 2 AES Lock: 0 = unlock, 1 = lock
(Request only) 1 Option Sync: 0 = no sync, 1 = sync
(Request only) LSB / 0 Option Lock: 0 = unlock, 1 = lock
17h Setup 3 MSB / 7 0
6 (reserved)
5 (reserved)
4 (reserved)
3 (reserved)
2 MSB / 1 Gain Target: 0 = auto, 1 = AES42 only,
1 LSB / 0 Gain Target: 2 = DMC only
LSB / 0 Analog Output Signal: 0 = i64, 1 = mic
Request Level Meter Data
Levelmeter Data MSB / 7 0
6
RX AES42: 0 = limiter not active, 1 =
lim. Act.
5 Input Sync: 0 = no sync, 1 = sync
4 Input Lock: 0 = unlock, 1 = lock
3 MSB / 3 Level: 0 = < -70dBFS peak
2 / 2
Level: 1..12 = < -60 / -50 / -42 / -36 /
-30 / -24 /
1 / 1 Level: -18 / -12 / -6 / -3 / -1 / -0.1 dBFS
LSB / 0 LSB / 0 Level: 13 = > -0.1 dBFS (over)