User`s guide

6
User’s Guide DMC-842 © RME
1. Introduction
The DMC-842 is both an AES/EBU interface as well as a controller for digital microphones. The
unique device allows for connection and control of up to 8 digital microphones, and converting
their signals to ADAT, AES/EBU, analog and (optional) MADI. Eight switchable hi-end sample
rate converters offer a flexible clocking and further usage options.
When developing the DMC-842, RME worked closely with the microphone manufacturers to
secure maximum compatibility and best functionality. As a result the DMC-842 is the most flexi-
ble and most compatible AES42 interface available – a true milestone for the broad acceptance
of the new digital microphone technology.
2. Package Contents
Please check that your DMC-842 package contains each of the following:
DMC-842
Power cord
Manual
RME Driver CD
1 optical cable (TOSLINK), 6.6 ft (2 m)
3. Brief Description and Characteristics
The DMC-842 is an 8-channel interface for AES42 digital microphones, with full remote control-
lability and optional MADI I/O. In a standard 19" box with 2 unit height the device offers numer-
ous extraordinary features like MultiMode, Intelligent Clock Control (ICC), SyncCheck, Steady-
Clock, MIDI over MADI, and remote control via AES, MADI and MIDI.
8 XLR AES/EBU inputs
8 balanced XLR line outputs
8-channel 24 bit sample rate conversion
Fully compatible to AES42
Digital Phantom Power switchable per input
Supports Mode 1 and Mode 2
Gain adjustable per channel, even in asynchronous Mode 1
Future-proof by flash updates
LED level meter with 13 LEDs per channel
Noise suppression on power-on and power-off at the analog outputs
M/S decoding/encoding
Fully remote controllable
Word clock input and output
SyncCheck tests and reports the synchronization status of the clock signals
SyncAlign guarantees sample aligned and never swapping channels
MIDI I/O
4 x AES/EBU Out per D-sub, 8 channels @ 192 kHz
2 x ADAT Out, 8 channels @ 96 kHz
Optional MADI I/O (I64 MADI Card)