User`s guide

User's Guide Fireface UC © RME

30. Technical Specifications

30.1 Analog

AD, Line In 5-8, rear

• Resolution AD: 24 bit

• Signal to Noise ratio (SNR): 110 dB RMS unweighted, 113 dBA

• Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.6 kHz

• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz

• Frequency response @ 192 kHz, -1 dB: 5 Hz - 90 kHz

• THD: < -100 dB, < 0.001 %

• THD+N: < -98 dB, < 0.0012 %

• Channel separation: > 110 dB

• Maximum input level: +19 dBu

• Input: 6.3 mm TRS jack, electronically balanced

• Input impedance: 10 kOhm

• Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV

• Input level for 0 dBFS @ Lo Gain: +19 dBu

• Input level for 0 dBFS @ +4 dBu: +13 dBu

• Input level for 0 dBFS @ -10 dBV: +2 dBV

Line In 3-4, front

• as AD, but:

• Signal to Noise ratio (SNR): 105 dB RMS unweighted, 109 dBA

• Gain range via rotary encoder: 0 up to +18 dB

• Maximum input level, Gain 0 dB: +19 dBu

• Maximum input level, Gain 18 dB, Inst: -16 dBu

• CLIP LED: -2 dBFS

• SIG LED: -65 dBFS

Microphone/Line 1-2, front

• as AD Line In 5-8, but:

• Input: Neutrik XLR/TRS Combo jack, electronically balanced

• Input impedance: XLR 2 kOhm, TRS 8 kOhm balanced

• Low Roll Off –0.5 dB: 18 Hz, -1 dB: 12 Hz

• Gain range: 0 dB, +10 up to +65 dB

• Maximum input level XLR, Gain 0 dB: +10 dBu

• Maximum input level XLR, Gain 65 dB: -55 dBu

• Maximum input level TRS, Gain +0 dB: +21 dBu

• Maximum input level TRS, Gain +65 dB: -44 dBu

• CLIP LED: -2 dBFS

• SIG LED: -65 dBFS