User`s guide

104
User's Guide Fireface UFX © RME
37. Technical Specifications
37.1 Analog
AD, Line In 1-8, rear
• Resolution AD: 24 bit
• Signal to Noise ratio (SNR): 110 dB RMS unweighted, 113 dBA
• Frequency response @ 44.1 kHz, -0.1 dB: 15 Hz – 21.5 kHz
• Frequency response @ 96 kHz, -0.5 dB: 7 Hz – 45.5 kHz
• Frequency response @ 192 kHz, -1 dB: 5 Hz – 66.5 kHz
• THD: < -110 dB, < 0.00032 %
• THD+N: < -104 dB, < 0.00063 %
• Channel separation: > 110 dB
• Maximum input level: +19 dBu
• Input: 6.3 mm TRS jack, electronically balanced
• Input impedance: 10 kOhm
• Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
• Input level for 0 dBFS @ Lo Gain: +19 dBu
• Input level for 0 dBFS @ +4 dBu: +13 dBu
• Input level for 0 dBFS @ -10 dBV: +2 dBV
Microphone In 9-12, front
As AD, but:
• Input: XLR, electronically balanced
• Input impedance: 2 kOhm
• Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
• Gain range: 65 dB
• Maximum input level, Gain 0 dB: +12 dBu
• Maximum input level, Gain 65 dB: -53 dBu
• CLIP LED: 0 dBFS
• SIG LED: -46 dBFS
Instrument In 9-12, front
As AD, but:
• Input: 6.3 mm TS jack, unbalanced
• Input impedance: 800 kOhm
• Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
• Gain range: 55 dB
• Maximum input level, Gain 10 dB: +21 dBu
• Maximum input level, Gain 65 dB: -34 dBu