User`s guide

8
User's Guide HDSPe MADI FX © RME
6.2 Internal Connectors
X1100 Sync In
Internal word clock input for synchronization of multiple cards via SYNC OUT.
X1101 Sync Out
This 3-pin connector carries an internal word clock signal. It can be used to synchronize multi-
ple cards with sample accuracy, and without the need for an external connection. The card
where SYNC OUT is used is master, the one with SYNC IN is slave. In the Settings dialog the
slave has to be set to Sync In under Clock Mode – Clock Source.
X1102 – Expansion Board
20-pin connector for the included HDSPe MADI FX expansion board.
X200
No function. Used to program the card in the factory.
X606
2-pin connector fitted with a blue jumper. Warning: without this jumper the card will not work!
7. Accessories
RME offers several optional components. Additionally parts of the HDSPe MADI FX, like the
special breakout cable, are available separately.
Part Number Description
BOAESMIDI AES/MIDI breakout cable
VKMADIFX 20-conductor flat ribbon cable
MADI0.5S MADI Optical Cable, Simplex, 0.5 m (1.6 ft)
MADI1S MADI Optical Cable, Simplex, 1 m (3.3 ft)
MADI3D MADI Optical Cable, Duplex, 3 m (9.9 ft)
MADI6D MADI Optical Cable, Duplex, 6 m (20 ft)
MADI10D MADI Optical Cable, Duplex, 10 m (33 ft)
MADI20D MADI Optical Cable, Duplex, 20 m (66 ft)
MADI50D MADI Optical Cable, Duplex, 50 m (165 ft)
MCD100 MADI Optical multicore on drum, 100 m
MCD150 MADI Optical multicore on drum, 150 m
MCD300 MADI Optical multicore on drum, 300 m