User`s guide

User's Guide HDSP MADI © RME

Clock Mode

The unit can be configured to

use its internal clock source

(Master), or the clock source

pre-defined via Pref. Sync Ref

(AutoSync).

Pref. Sync Ref.

Used to pre-select the desired

clock source. If the selected

source isn't available, the unit

will change to the next available

one. The current clock source

and sample rate is displayed in

the AutoSync Ref display.

The automatic clock selection

checks and changes between

the clock sources Word Clock

and MADI.

Input Status

Displays the state of the current input signal:

• Channel format (64 or 56 channels)

• Frame format (48K or 96K)

• Sample rate (measured)

• Active input (optical or coaxial)

System Clock

Shows the current clock state of the HDSP system. The system is either Master (using its own

clock) or Slave (see AutoSync Ref).

SyncCheck

SyncCheck indicates whether there is a valid signal (Lock) for the inputs Word Clock and MADI,

or if there is a valid and synchronous signal (Sync). The AutoSync Reference display shows the

input and frequency of the current sync source.