User`s guide

6408 216th Street SW | Mountlake Terrace, WA 98043 USA
T +1.425.778.7728 F +1.425.778.7727 | www.SymetrixAudio.com
10
User’s Guide
Applications
To ANALOG INPUTS
From ANALOG OUTPUTS
Optical
(Toslink)
Cables
88192 with the Digidesign 001/002
88192 Setup
1. In the “Route” menu, ensure that “Analog INs ADAT OUTs” and
“ADAT INs Analog OUTs” are both shown.
2. In the “Sync” menu, select the desired internal sample rate. NOTE: the
001/002 hardware’s ADAT I/O only supports sample rates up to 48
kHz.
Digidesign 001/002 Setup
1. In the Pro Tools software, open the “Hardware Setup” and set the
“Clock Source” to “ADAT”.
2. In the Pro Tools software, select inputs “ADAT 1-8” as your
input sources.
3. In the Pro Tools software, select outputs “ADAT 1-8” as your output
destinations.
For more information or troubleshooting steps, please consult
your Digidesign documentation or the support resources
at http://www.digidesign.com.