User`s guide

88192 A/D D/A Converter

Applications

Applications - 88192 and Digidesign HD (192 Digital)

To ANALOG INPUTS

From ANALOG OUTPUTS

WORD CLOCKAES XLR to DB25

cable, Hosa DBK258

or similar

88192 Setup

1. In the “Route” menu, ensure that “Analog INs AES OUTs” and “AES

INs Analog OUTs” are both shown.

2. In the “Sync” menu, select the desired internal sample rate.

Digidesign HD (192 Digital) Setup

1. In the Pro Tools software, open the “Hardware Setup” and set the

“Clock Source” to “Word Clock”.

2. Also in the “Hardware Setup” under the “Main” tab, set “Input” to

consecutive AES pairs, i.e. “AES 1-2”, “AES 3-4” and so on.

3. Also in the “Main” tab of the “Hardware Setup”, set “Output” to

consecutive pairs, i.e. “Digital 1-2”, “Digital 3-4” and so on.

4. In the “I/O Setup” under the “Input” tab, click the “Default” button to

quickly perform the required routing. Repeat for the “Output” tab.

5. In the “Mix” window, assign the required tracks/channels to the

software routing conﬁgured in the previous steps.

For more information or troubleshooting steps, please consult

your Digidesign documentation or the support resources

at http://www.digidesign.com.