User`s guide

15
88192 A/D D/A Converter
Appendix A - Hardware Menu Structure
0: Startup - Full screen startup graphic
Panel Control Functions and Default States
EXIT: Not Applicable
ENTER: Not Applicable
DIAL: Not Applicable
DEFAULT: Not Applicable
1: Display - Central 8-channel meters with L/R
status panels
LEFT SIDE:
Sync Source (INTERNAL, ADAT, AES 1+2, AES 3+4, AES 5+6, AES
7+8, OPTION, WORD)
Sample Rate
Lock
RIGHT SIDE:
Metering source (ADAT, AES, Analog, Option)
Input or Output Metering
Clip
Panel Control Functions and Default States
EXIT: Jump to menu level 2
ENTER: Cycle display options
DIAL: Cycle Metering Sources
DEFAULT: As shown
2: Setup - Main
ADAT: Jump to menu level 3
AES: Jump to menu level 4
ANALOG: Jump to menu level 5
METER: Jump to menu level 6
ROUTE: Jump to menu level 7
SYNC: Jump to menu level 8
SYSTEM: Jump to menu level 9
Panel Control Functions and Default States
EXIT: Jump to menu level 1
ENTER: Go to selected submenu
DIAL: Cycle through available options
DEFAULT: ADAT (from factory), Last accessed (if used before)
3: Setup - ADAT
Options are set ON/OFF
*SMUX OUT STATUS is automatically set to ON when Sample Rate is
50 to 100 kHz
Panel Control Functions and Default States
EXIT: Jump to menu level 2
ENTER: Toggle parameter ON/OFF
DIAL: Cycle through available options
DEFAULT: ADAT INs SRC (from factory), Last accessed (if used before),
ON (for SRC data), OFF (for SMUX IN data)