User`s guide

6408 216th Street SW | Mountlake Terrace, WA 98043 USA
T +1.425.778.7728 F +1.425.778.7727 | www.SymetrixAudio.com
18
User’s Guide
8: Setup - Sync
INTERNAL: 44.1, 48, 88.2, 96, 176.4, 192
When Internal chosen, External becomes OFF, lights to indicate internal
sync rate (30 - 200 kHz)
LOCKED/UNLOCKED - when Internal chosen, lights to verify lock
status
When External chosen, Internal becomes OFF
EXTERNAL: ADAT, AES 1+2, AES 3+4, AES 5+6, AES 7+8, OPTION,
WORD
When External chosen, lights to indicate sync rate (30 - 200 kHz)
LOCKED/UNLOCKED - when External chosen, lights to indicate lock
status
Panel Control Functions and Default States
EXIT: Jump to menu level 2
ENTER: Select/deselect option
DIAL: Toggle options (deselected), cycle through sync rates (when
Internal selected), through sync sources (when External selected)
DEFAULT: Internal (from factory), Last accessed (if used before),
Internal/44.1 (for data)
9: Setup - Main
MISCELLANY: Jump to menu level 9.1
RS-232: Jump to menu level 9.2
FIRMWARE: Firmware revision display
Panel Control Functions and Default States
EXIT: Jump to menu level 2
ENTER: Go to selected submenu
DIAL: Cycle through options
DEFAULT: Miscellany (from factory), Last accessed (if used before)”
9.1: Setup - Miscellany
SCREENSAVER: OFF, 5, 10, 15, or 30 mins
ROUTING UNIT: 2 or 8
DEFAULTS: Reload factory default settings
Panel Control Functions and Default States
EXIT: Jump to menu level 9
ENTER: Go to menu level 9 (for PREVIOUS), toggle (for Routing Units),
select/deselect options (for Screensaver), impulsive (for RESET)
DIAL: Cycle through options (deselected), settings (if Routing Unit
selected)
DEFAULT: Clear Holds (from factory), Last accessed (if used before), 8
(for Routing Unit), 30 mins (for Screensaver)
Appendix A - Hardware Menu Structure