User`s guide

14 User’s Guide MADI Router © RME

● S/MUX: ? | Off

Double Speed (88.2/96kHz) and Quad Speed (176/192kHz) signals that

make use of the sample multiplexing method instead of longer frame

lengths cannot be identified automatically, but are instead shown as

Single Speed signals. In this case, S/MUX shows “?” to indicate that the

incoming signal may or may not be multiplexed. If a 96k frame is detected,

this field shows “Off”.

Note: the MADI Router does not perform sample rate conversion. The

Signals that are aggregated within one matrix must have the exact same

reference clock (they all must be “in sync”).