User`s guide

16 User’s Guide MADI Router © RME
To delete a routing, rotate the input encoder counter-clockwise until the cursor
disappears to the left of the "A Optical" input icon, or rotate the [IN] encoder counter-
clockwise while pressing the [GANG] button.
To copy a routing to the next port on the right of the currently selected output port, press
and hold the [GANG] button while turning the [OUT] encoder clockwise.
Pushing the [IN] encoder while holding down the [GANG] button toggles the source for
the currently selected port between the corresponding input port (loopback), matrix 1
and no patch.