User`s guide

User’s Guide MADI Router © RME 33
7.5.6 Firmware Updates
“Firmware Updates” allows users to update the device firmware. In order to perform an
update, a firmware file (main.upd) has to be placed in the root folder of a USB stick and
the stick attached to the rear USB port of the device.
After an initial confirmation, the device first checks for a firmware update file on the
attached USB stick, then compares it to the currently flashed firmware. If the current
firmware is different from the one on the USB stick, the firmware update procedure starts.
The firmware is checked in a fourth and final step.
A progress bar indicates each step. The steps may not be interrupted, as this would
damage the device.