User`s guide
User’s Guide MADI Router © RME 7
5. Technical Specifications
● Two internal redundant power supplies, 100-240V AC, typ. 30W, max. 75W
1
● Dimensions without rack ears (WxHxD): 440 x 44 x 240 mm (17.32” x 1.73” x
9.45”)
● Temperature range: +5° up to +50° Celsius (41° F up to 122° F)
● Relative humidity: < 75%, non condensing
● Weight: 2.8 kg
5.1 Inputs
MADI
● Coaxial via BNC, 75 Ohm, according to AES10-1991
● High-sensitivity input stage (< 0.2 Vpp)
● Optical via FDDI duplex SC connector
● 62.5/125 and 50/125 multimode compatible
● Both Optical and Coaxial ports accept any MADI signal
● Twisted Pair via RJ45 connector (input and output)
● Pinout “EXT”: 1-2 receive, 3-6 send, 4-5 DC +48V, 7-8 -48V
Note: The Twisted Pair implementation uses standard ethernet technology such
as 8b/10b encoding for DC-balance, which is important to achieve stability over
long cable runs. At the time of writing it is proprietary to RME. Different
implementations made by other manufacturers may show incompatibilities.
Word Clock
● BNC, not terminated (10 kOhm)
● Switch for internal termination 75 Ohm
● Automatic Double/Quad Speed detection
● SteadyClock guarantees super low jitter synchronization
● Capacitive coupled, galvanically isolated input
● Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
● Overvoltage protection
● Level range: 0,7 Vpp – 3.3 Vpp
1
depending on number of attached MADI TP powered devices and USB peripherals.