User's Manual

User’s Guide ADI-2 DAC v2.2 © RME

9. RME Multi-Remote Control (MRC)

The included infrared remote control, manufactured exclusively for RME, offers an almost com-

plete remote control of the ADI-2 DAC in a clear way. It works immediately without further set-

tings on the device, since the DAC code table is pre-set from factory. Pressing a button there-

fore causes the SEL LED to light up green. If the LED is orange, red or blue, another reserved

code table is active that is not compatible with the ADI-2 DAC.

The code tables are changed as follows:

¾ Keep SEL pressed until the LED lights up constantly.

¾ Press button 1. The LED turns green and then off. The remote control now works with the

ADI-2 DAC.

Note

: SETUP – Options - Remap Keys/Diagnosis - Remap Keys must be set to Remote.

9.1 Keys and Functions

SEL. Choice between 4 different code tables. The ADI-2 DAC

uses table 1, recognizable by the LED color green.

Power On/Off. Press and hold the button for 1 second to switch

off.

B/T. Bass/Treble active or off (linear).

EQ. PEQ active or off (linear).

LD. Loudness active or off.

B+ / - . Increase or decrease bass, same as encoder 1.

+ (VOL) - . Increase or decrease volume.

VOL. Corresponds to pressing the VOLUME button on the unit.

Short press results in mute, long press results in output change

when configured via SETUP, Options, Phones / DSD, Mute Line

- Toggle Ph/Line.

T+ / - . Increase or decrease treble, same as encoder 2.

L / R. Change balance between left and right.

COAX. OPT. USB. Direct selection of the playback source

(SPDIF Coaxial, Optical, USB). By pressing the same button

twice the ADI-2 DAC activates Source Auto mode.

1, 2, 3, 4. Remap Function Keys. In the SETUP, Options, Remap Keys /Diagnosis menu, 32

different commands/actions are available for these four programmable keys (see chapter

14.1.1). Functions such as polarity, crossfeed or DAC filters can be controlled live from the

preferred listening position. The default settings are: 1 Mono, 2 Loudness, 3 AutoDark, 4 Dim.

Mute. Mute the audio output.

The remote requires a standard lithium battery CR2025 (included). For first time usage please

tear out the transparent plastic isolation completely.