User Manual

28
User's Guide HDSP AES-32 © RME
Output Format
Double Speed: Sample rates in the range of 64 kHz to 96 kHz can also be transmitted using the
standard 48K frame. Note that when selecting Double Wire the number of output channels is
reduced to 8.
Quad Speed: Sample rates in the range of 128 kHz to 192 kHz can also be transmitted using
either the standard 48K frame, or the 96K frame. Note that when selecting Double Wire the
number of output channels is reduced to 8. When selecting Quad Wire the number of remaining
output channels is 4.
For further details about the settings ‘Professional’, ‘Emphasis’ and ‘Non-Audio’, please refer to
chapter 23.2.
Input Status
SyncCheck indicates whether there is a valid signal (Lock) for the inputs Word Clock, Sync
Internal and AES 1 to 8, or if there is a valid and synchronous signal (Sync). The System Clock
Mode display shows the input and frequency of the current sync source. Each input has its own
frequency measurement and display of the input signal's current sample rate.
Pref. Sync Ref.
Used to pre-select the desired clock source. If the selected source isn't available, the unit will
change to the next available one. The current clock source and sample rate is displayed in the
System Clock field.