User Manual

ManualsBrandsRME ManualsUSB Audio CardsBabyface Pro

User's Guide Babyface Pro © RME

21.7 Preferences

The dialog Preferences can be opened via the Options menu or directly via F2.

Level Meters

¾ Full scale samples for OVR. Number

of consecutive samples to trigger an

over detection (1 to 10).

¾ Peak Hold Time. Hold time of the peak

value. Adjustable from 0.1 up to 9.9 s.

¾ RMS +3 dB. Shifts the RMS value by

+3 dB, so that full scale level is identical

for Peak and RMS at 0 dBFS.

Mixer Views

¾ FX Send follows highest Submix.

Locks the FX Send knob to the channel

fader. As TotalMix supports multiple

routings per channel, a definition is

needed which fader (only one is visible)

is the one that FX Send will follow. This

is always the one with the highest fader

position, means the highest gain.

¾ FX Send follows Main Out. Locks the

FX Send knob to the channel fader only

for the Main Out submix. This is a

typical Live feature, where the FX Send

is always tied to the fader for the most

important output - the Main Out. When

adjusting other submixes the FX send

will not follow the fader movement.

¾ Center Balance/Pan when changing

Mono/Stereo. When switching a stereo

channel into two mono channels the

pan-pots are set fully left and right. This

option will set them to center instead.

¾ Disable double click fader action.

Prevents unintentional gain settings, for

example when using sensitive touch-

pads.

Dynamic Meters

Not valid for the Babyface Pro, as these

refer to Compressor and Expander

functionality in other RME devices.

Snapshots

¾ Do not load Main volume/balance. The values stored in the Snapshot are not loaded for

the Main Out and all groups of output faders joined by Main, so the current setting for all

these is not changed.

Device Handling

Always init… and Count MADI… are not valid for the Babyface Pro.

¾ Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the Babyface

Pro within TotalMix FX.

Graphics

¾ Use D2D (Change requires restart). Default on. Can be deactivated to use a compatible

but CPU-taxing graphics mode, in case graphics problems show up.