User Manual

28
User's Guide HDSPe RayDAT © RME
17.2 Installation
HDSPe RayDAT is found in the Device Manager (>Settings/ Control Panel/ System<), category
'Sound-, Video- and Gamecontroller'. A double click on 'HDSPe RayDAT' starts the properties
dialog. Choosing 'Resources' shows interrupt and memory range.
The newest information on hardware problems can always be found on our website www.rme-
audio.de, section FAQ, Hardware Alert: about incompatible hardware.
The dialog 'New hardware component found’ does not appear:
• Check whether the PCI Express interface is correctly inserted in the PCI Express slot.
The card and drivers have been installed correctly, but playback does not work:
• Check whether the Hammerfall DSP appears in the Device Manager. If the ' Hammerfall
DSP’ device has a yellow exclamation mark, then there is an address or interrupt conflict.
• Even if there is no yellow exclamation mark, it's still worth checking the ‘Resources’ tab.