User Manual

User's Guide MADIface XT © RME

19.3 Menu Keys MIC/GAIN and METERS

MIC/GAIN

This key brings up the Mic Gain screen, where the gain can be

directly controlled with encoder 1 and 2. Pressing encoder 1 and

2 activates the AutoSet function. The label AS in the display

changes from light gray to solid black.

METERS. Brings up the Mix screen. Note that changes to the

current mix state can not be performed at the unit when it is

connected to a computer! This feature is a means to be able to

adjust or modify a routing/mixing when the unit is used stand-

alone. Proceed as follows:

Turn encoder 1 and select the desired output, for example Mix to

Analog Out 1/2. Now turn encoder 2 for the signal that should be

routed/mixed to Analog Out 1/2 – for example Mic In 1. Press

encoder 2 one time, so Fader gets selected. Turn encoder 2 to

adjust the gain for this routing, equalling the fader position of the

Mic In 1 input with selected Submix AN 1/2 in TotalMix FX.

As with the other three keys pressing METERS a second time returns the display to the global

level meter screen showing all inputs, outputs and FX send/return levels, DSP load meter, cur-

rent interface mode, digital input state of all 5 inputs and MIDI state.

19.4 Channel Menu

All channels have the following entries in Settings:

Mute

Mutes a channel. Allows to remove a signal without the need to change the current gain/volume

setting.

Channel Type

Mono / Stereo.

Phase Invert

Phase Invert changes the polarity (180°). Useful to fix wrongly soldered cables or to eliminate

sound and phase errors.

All input channels have these additional entries:

M/S-Proc

Activates M/S processing within the stereo channel. Monaural

information is sent to the left channel, stereo information to the

right.

FX Send

Sets the level of the signal sent to the FX bus which feeds Echo

and Reverb effect.